Estimate shipping
Enter your postcode for a live delivery price.
All orders are automatically protected against loss or damage with Parcel Protect.
Sold per metre — quantity = metres needed
Need 4 metres? Set the quantity to 4. Need 1 metre? Set quantity to 1.
Only fits the Yellow Advance Humidity Pump swivel
This thicker gauge tube is for the pump's swivel section only. You'll also need the standard-gauge silicone tubing to connect the swivel to the water container and the incubator.
If your pump isn't yellow, you probably want the standard-gauge tubing instead.
Which setup it fits
How to tell it's time to replace
The swivel tubing takes more punishment than the rest of the line — check it any time humidity drops off:
How to fit it
-
1Unplug the pump and empty the water container.
-
2Locate the swivel — it's the short section of thicker tubing on the yellow pump body.
-
3Pull the old tubing off the swivel lugs. Note how the standard tubing connects to it.
-
4Cut the new tubing to match the length of the piece you removed, and push it firmly onto the swivel lugs.
-
5Reconnect the standard tubing to the ends of the new swivel piece, refill, and run the pump for 60 seconds to prime and leak-check.
Bundle up — save on shipping
Sending small items on their own costs around $10–12 by Australia Post. We do our best to keep it low, but we're stuck with their rates.
Adding this to another order? Everything goes in the same parcel — one shipping charge for the lot.
Can't find the part you need?
We can source almost any spare part from the brands we stock — even parts not currently listed on our site. Get in touch and we'll track it down and quote you back within a business day.
Not sure this is the right tubing?
The thicker gauge is only for the yellow Advance Humidity Pump swivel section. If your pump isn't yellow, you probably want the standard-gauge instead. Send us a photo and we'll confirm.